Akrapovic Exhaust System for Audi RS3 (8Y)

AkrapovičSKU: AKRA-AUD-0-KIT

Price:
Sale price$13,316.99
Stock:
In stock

EV - Evolution

This product is constructed with high-grade titanium tubes and a muffler, which are attached to the car’s stock downpipes with a high-quality stainless-steel link pipe and finished with handcrafted carbon-fibre tailpipes and a titanium inner sleeve.

Weighing in at 36.2% lighter than the standard setup, this system provides power gains of 7.5 kW (10.2 hp) at 5,450 rpm and torque increases of 8.8 Nm at 3,900 rpm (when tested on the Akrapovič dyno against an Audi RS 3 with a standard stock exhaust).

The in-house foundry casts the housings for the two exhaust valves, one for each side of the muffler to tailor the sound. The distinctive tones of the five-cylinder engine serve up a relaxed and pleasing purr in comfort mode, with a tasteful reminder of the car’s potential when cruising in dynamic mode, and then the full sound experience is delivered while accelerating and reaching for the limit. A high-gloss handmade rear carbon-fibre diffuser is available as an optional extra, as is the optional Akrapovič Sound Kit to offer full control over the exhaust tones.

*If the Akrapovič Sound Kit is fitted, the Evolution Line (Titanium) ECE type-approval certificate is not valid.

The exhaust system is ECE type approved for cars equipped with an Otto/gasoline particulate filter.

PERFORMANCE:

Unit Stock Akrapovic Max gain
Maximum power kW 296.9 / 6050 rpm 300.5 / 6100 rpm + 7.5 / 5450 rpm
HP (m) 403.7 / 6050 rpm 408.6 / 6100 rpm + 10.2 / 5450 rpm
HP (i) 398.1 / 6050 rpm 403.0 / 6100 rpm + 10.1 / 5450 rpm
Maximum torque Nm 538.2 / 3250 rpm 544.2 / 3050 rpm + 16.3 / 2800 rpm
lb-ft 397.0 / 3250 rpm 401.4 / 3050 rpm + 12.0 / 2800 rpm
Weight kg 22.9 12.8 - 10.1
lb 50.5 28.2 - 22.3
% - 44.1
Installation time min 210

EV - Evolution

This product is constructed with high-grade titanium tubes and a muffler, which are attached to the car’s stock downpipes with a high-quality stainless-steel link pipe and finished with handcrafted carbon-fibre tailpipes and a titanium inner sleeve.

Weighing in at 44.1% lighter than the standard setup, this system provides power gains of 7.5 kW (10.2 hp) at 5,450 rpm and torque increases of 8.8 Nm at 3,900 rpm (when tested on the Akrapovic dyno against an Audi RS 3 with a standard stock exhaust).The in-house foundry casts the housings for the two exhaust valves, one for each side of the muffler to tailor the sound. The distinctive tones of the five-cylinder engine serve up a relaxed and pleasing purr in comfort mode, with a tasteful reminder of the car’s potential when cruising in dynamic mode, and then the full sound experience is delivered while accelerating and reaching for the limit.

A high-gloss handmade rear carbon-fibre diffuser is available as an optional extra, as is the optional Akrapovic Sound Kit to offer full control over the exhaust tones.*If the Akrapovic Sound Kit is fitted, the Evolution Line (Titanium) ECE type-approval certificate is not valid.

The exhaust system is ECE type approved for cars equipped with an Otto/gasoline particulate filter.

PERFORMANCE:

Unit Stock Akrapovic Max gain
Maximum power kW 296.9 / 6050 rpm 300.5 / 6100 rpm + 7.5 / 5450 rpm
HP (m) 403.7 / 6050 rpm 408.6 / 6100 rpm + 10.2 / 5450 rpm
HP (i) 398.1 / 6050 rpm 403.0 / 6100 rpm + 10.1 / 5450 rpm
Maximum torque Nm 538.2 / 3250 rpm 544.2 / 3050 rpm + 16.3 / 2800 rpm
lb-ft 397.0 / 3250 rpm 401.4 / 3050 rpm + 12.0 / 2800 rpm
Weight kg 22.9 12.8 - 10.1
lb 50.5 28.2 - 22.3
% - 44.1
Installation time min 210

The optional Akrapovic Sound Kit enables owners of selected Akrapovic car exhausts to control the sound of the system from the cockpit of their machine.

Using Akrapovic technology, drivers can easily switch between the quiet mode and a sportier sound.

With the use of a receiver (already included in evolution system) to drive the actuators that open or close the valves at the end of the exhaust system, drivers can use the Sound Remote Controller or the new smartphone app (for iOS and Android) to regulate the valves.

With the use of the optional Akrapovic Sound Kit, the ECE type approval is no longer valid.Pictures are symbolic.

PERFORMANCE:

Unit Stock Akrapovic Max gain
Installation time min 90

This high-gloss handcrafted accessory has been designed to integrate perfectly with the lines of the Audi RS 3.

It was created from scratch to offer an impeccable ABE type-approved enhancement to the new tailpipes on the Evolution Line (Titanium) exhaust system.

Fitment notice:

The diffuser cannot fit with genuine trailer tow hitch.

With Akrapovic diffuser, hands-free trunk-lid opening/closing sensor is not working.

PERFORMANCE:

Unit Stock Akrapovic Max gain
Weight kg 4.6 2.2 - 2.4
lb 10.2 4.9 - 5.3
% - 52.6
Installation time min 120.0

Estimate shipping

Vero Motorsport

Address: 101 Moray Street, South Melbourne VIC 3205

Email: info@veromotorsport.com

Not sure if a part fits your vehicle? Contact us with your make, model, and year before ordering. We will confirm compatibility so you order the right part the first time.

Every product is covered by a 12-month manufacturer-backed warranty from the date of purchase.

Vero Motorsport works with a national network of authorised installers. Contact us with your location and fitment requirements for a recommended workshop in your area.

You may also like

Recently viewed